manualshive.com logo in svg

Dell Latitude E4200, Service Manual

Share
Download
Dell Latitude E4200 Service Manual Download Page 56

Back to Contents Page

  

 

 TAA Board  

Dell™ Latitude™ E4200 Service Manual

 

  

Removing the TAA Board 

 

  

Replacing the TAA Board 

 

 

 

 

 

Removing the TAA Board  

 

 

1.

Follow the procedures in 

Before Working on Your Computer

.  

 

 

  

2.

Remove the service panel (see 

Removing the Service Panel

).  

 

 

  

3.

Pull up on the TAA board to disconnect it from the system board.  
 

  

 

Replacing the TAA Board  

 

 

1.

Align the connector on the TAA Board with the connector on the system board, and press the TAA board into place.  
 

 

  

2.

Replace the service panel (see 

Replacing the Service Panel

).  

 

 

  

3.

Follow the procedures in 

After Working on Your Computer

.  

 

Back to Contents Page

 

 

 

 

CAUTION: 

Before working inside your computer, read the safety information that shipped with your computer. For additional safety best 

practices information, see the Regulatory Compliance Homepage on www.dell.com at: www.dell.com/regulatory_compliance. 

 

NOTE: 

The Trade Agreements Act (TAA) board is optional and may not be present in some computers.

1 

TAA board 

2 

system board 

3 

connector 

 

 

 

 

Summary of Contents for Latitude E4200










































































Reviews:

No comments

Brands by name

Popular brands

Load more brands