manualshive.com logo in svg

Dell Latitude E4200, Service Manual

Share
Download
Dell Latitude E4200 Service Manual Download Page 16

Back to Contents Page

  

 

 Display Assembly  

Dell™ Latitude™ E4200 Service Manual

 

 

 

 

 

Types of Liquid Crystal Display (LCD) Covers  

The five LCD cover designs that can be ordered in different color options are: 

l

 

WLAN support only with short antenna cable: 

 

l

 

No bumps 

 

l

 

Short antenna cable (WLAN antenna cables connect to the radio switch board) 

 

l

 

WWAN and WLAN support only: 

 

l

 

A bump on either side of the LCD top cover 

 

l

 

WLAN cables route to the radio switch board 

 

l

 

WWAN cables route to the WWAN card 

 

l

 

WLAN, WWAN, and Camera bump support: 

 

l

 

A bump on either side of the LCD top cover 

 

l

 

WLAN cables route to the radio switch board 

 

l

 

WWAN cables route to the WWAN card 

 

 

Removing the Display Assembly  

 

 

1.

Follow the instructions in 

Before Working on Your Computer

.  

 

 

  

2.

Remove the service panel (see 

Removing the Service Panel

).  

 

 

  

3.

Disconnect the WLAN and WWAN cables.  
 

 

  

4.

Turn the computer topside up.  
 

 

  

5.

Remove the LED cover (see 

Removing the LED Cover

).  

 

 

  

6.

Remove the keyboard (see 

Removing the Keyboard

).  

 

 

  

7.

Disconnect the cable to the display assembly by gently pulling up on the tab near the cable's connector.  
 

 

  

8.

Disconnect the antenna cables.  
 

If present, remove the radio switch board (see 

Removing the Radio Switch Board

) and disconnect and unroute the WWAN cables. 

If the radio switch board is not present, disconnect and unroute the WLAN and WWAN cables.  

 

 

9.

Position all cables leading to the display assembly to the rear of the computer.  
 

 

  

10.

Remove the four M2.5 x 5-mm screws securing the display assembly.  
 

  

Types of Liquid Crystal Display (LCD) Covers 

 

  

Removing the Display Assembly 

 

  

Replacing the Display Assembly 

 

  

Removing the Display Bezel 

 

  

Replacing the Display Bezel 

 

  

Removing the Display Panel 

 

  

Replacing the Display Panel 

 

  

Removing the Display Hinges 

 

  

Replacing the Display Hinges 

 

  

Removing the Display Cable/Display Cable with Camera 

 

  

Replacing the Display Cable/Display cable with Camera 

 

 

CAUTION: 

Before working inside your computer, read the safety information that shipped with your computer. For additional safety best 

practices information, see the Regulatory Compliance Homepage on www.dell.com at: www.dell.com/regulatory_compliance. 

Summary of Contents for Latitude E4200










































































Reviews:

No comments

Brands by name

Popular brands

Load more brands