manualshive.com logo in svg

Dell Latitude E4200, Service Manual

Share
Download
Dell Latitude E4200 Service Manual Download Page 72

Back to Contents Page

  

 

 WWAN Card  

Dell™ Latitude™ E4200 Service Manual

 

  

Removing a WWAN Card 

 

  

Replacing a WWAN Card 

 

 

 

 

 

 

 

Removing a WWAN Card  

 

 

1.

Follow the procedures in 

Before Working on Your Computer

.  

 

 

  

2.

Remove the service panel (see 

Removing the Service Panel

).  

 

 

  

3.

Disconnect the antenna cables from the card.  
 

 

  

4.

Remove the M2 x 3-mm screw. The card pops up at a 45-degree angle.  
 

  

 

 

5.

Slide the card out of the card connector on the system board.  
 

  

 

Replacing a WWAN Card  

 

 

 

CAUTION: 

Before working inside your computer, read the safety information that shipped with your computer. For additional safety best 

practices information, see the Regulatory Compliance Homepage on www.dell.com at: www.dell.com/regulatory_compliance. 

 

NOTICE: 

Insert a WWAN card only into the slot labeled WWAN. 

1 

antenna cables (2) 

2 

WWAN card 

3 

screw 

 

 

 

 

1 

WWAN card 

2 

card connector 

Summary of Contents for Latitude E4200










































































Reviews:

No comments

Brands by name

Popular brands

Load more brands