Dell Latitude E4200 Service Manual Download Page 30

Page: 30 / 73

Back to Contents Page

Latitude ON™ Card

Dell™ Latitude™ E4200 Service Manual

Removing the Latitude ON Card

Replacing the Latitude ON Card

Removing the Latitude ON Card

Follow the procedures in

Before Working on Your Computer

Remove the service panel (see

Removing the Service Panel

Disconnect the antenna cables from the card.

Remove the M2 x 3-mm screw.

Pull the card up to disconnect it from the system board connector.

CAUTION:

Before working inside your computer, read the safety information that shipped with your computer. For additional safety best

practices information, see the Regulatory Compliance Homepage on www.dell.com at: www.dell.com/regulatory_compliance.

NOTE:

The Latitude ON™ card is optional and may not be present in some computers.

antenna cables (2)

Latitude ON card

screw

Latitude ON card

system board connector

Summary of Contents for Latitude E4200










































































Search results

Summary of Contents for Latitude E4200

Reviews:

Related manuals for Latitude E4200

Brands by name

Popular brands

Dell Latitude E4200, Service Manual

Search results

Summary of Contents for Latitude E4200

Reviews:

Related manuals for Latitude E4200

Brands by name

Popular brands