SIM-kortsplatshållare
Removing the dummy SIM-card slot filler
Prerequisites
before working inside your computer
.
2. Remove the
.
3. Remove the
.
4. Remove the
.
5. Remove the
or
.
6. Remove the
or
.
7. Remove the
.
8. Remove the
9. Remove the
.
10. Remove the
NOTE:
The system board can be removed with the heat sink attached in order to simplify the procedure and preserve
the thermal bond between the system board and heat sink.
11. Remove the
12. Remove the
.
13. Remove the
.
14. Remove the
.
15. Remove the
.
16. Remove the
.
17. Remove the
.
About this task
NOTE:
For models shipped with WLAN antennas only, the dummy SIM-card slot filler is a separate service part and is not
included with replacement palm rest. As a result, the dummy SIM-card slot filler must be removed and then reinstalled when
replacing the palm-rest assembly.
The following image indicates the dummy SIM-card slot filler and provides a visual representation of the dummy SIM-card slot
filler removal procedure.
84
Ta bort och installera komponenter
Summary of Contents for Latitude 5430
