Steps
1. Using the alignment posts and rubber grommets, place the speakers in the slots on the palm-rest assembly.
2. Route the speaker cable through the routing guide on the assembly inner frame and palm-rest assembly.
3. Connect the speaker cable to the connector on the system board.
Next steps
1. Install the
or
.
2. Install the
.
3. Install the
.
4. Install the
after working inside your computer
.
Moderkort
Removing the system board
Prerequisites
before working inside your computer
.
2. Remove the
.
3. Remove the
.
4. Remove the
.
5. Remove the
or
.
6. Remove the
or
.
7. Remove the
.
8. Remove the
9. Remove the
.
10. Remove the
.
11. Remove the
About this task
The following images indicate the location of the system board and provide a visual representation of the removal procedure.
44
Ta bort och installera komponenter
Summary of Contents for Latitude 5430
