Dell Latitude 5430, Service Handbook

Page: 35 / 110

Steps
1. Align and place the battery cable on the battery.
2. Route the battery cable through the routing guides on the battery.
3. Connect the battery cable to the connector on the battery.
Next steps
1. Install the 3-cell battery or 4-cell battery .
2. Install the base cover .
3. Install the microSIM card .
4. Install the microSD card .
5. Follow the procedure in after working inside your computer .
Innerramens enhet
Removing the assembly inner frame
Prerequisites
1. Follow the procedure in before working inside your computer .
2. Remove the microSD card .
3. Remove the microSIM card .
4. Remove the base cover .
5. Remove the 3-cell battery or 4-cell battery .
6. Remove the M.2 2280 solid-state drive or M.2 2230 solid-state drive .
7. Remove the WLAN card .
8. Remove the WWAN card .
About this task
The following image indicates the location of the assembly inner frame and provides a visual representation of the removal
procedure.
Ta bort och installera komponenter 35