About this task
The following image indicates the location of the 3-cell battery and provides a visual representation of the installation procedure.
NOTE:
If battery is disconnected from system board for service, then there is a delay during system boot-up as the system
undergoes RTC battery reset.
Steps
1. Align and place the battery from the left side on the computer.
2. Replace the three (M2x5) screws to secure the battery to the palm-rest assembly.
3. Connect the battery cable to the connector on the system board.
Next steps
1. Install the
.
2. Install the
.
3. Install the
after working inside your computer
.
Removing the 4-cell battery
Prerequisites
before working inside your computer
.
2. Remove the
.
3. Remove the
.
4. Remove the
.
NOTE:
If battery is disconnected from system board for service, then there is a delay during system boot-up as the system
undergoes RTC battery reset.
About this task
The following images indicate the location of the battery and provide a visual representation of the removal procedure.
Ta bort och installera komponenter
31
Summary of Contents for Latitude 5430
