Dell Latitude 5430, Service Handbook

Page: 64 / 110

CAUTION: Carefully pry and remove the display bezel to minimize the risk of display panel damages.
1. Insert a plastic scribe into the recesses near both hinge caps to start the prying process to release the display bezel.
2. Pry along the outside edge of the display bezel and work your way around the entire display bezel until the display bezel is
separated from the display cover.
3. Lift the display bezel from the display assembly.
Installing the display bezel
Prerequisites
Om du byter ut en komponent, ta bort den befintliga komponenten innan du utför installationsproceduren.
About this task
The following image indicates the location of the display bezel and provides a visual representation of the installation procedure.
Steps
1. Align and place the display bezel on the display assembly.
2. Gently snap the display bezel into place.
Next steps
1. Install the display assembly .
2. Install the WLAN card .
3. Install the WWAN card .
4. Install the base cover .
5. Install the microSIM card .
6. Install the microSD card .
7. Follow the procedure in after working inside your computer .
64 Ta bort och installera komponenter