Installing the M.2 2280 solid-state drive
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the M.2 2280 solid-state drive and provides a visual representation of the
installation procedure.
Steps
1. Align the notch on the M.2 2280 solid-state drive with the tab on the solid-state drive slot.
2. Slide the M.2 2280 solid-state drive into the solid-state drive slot on the system board.
3. Align the screw holes on the M.2 2280 solid-state drive thermal plate with the screw holes on the system board.
4. Replace the two (M2x3) screws to secure the M.2 2280 solid-state drive thermal plate to the system board.
Next steps
1. Install the
.
2. Install the
.
3. Install the
after working inside your computer
.
Removing the M.2 2230 solid-state drive
Prerequisites
before working inside your computer
.
2. Remove the
.
3. Remove the
.
4. Remove the
.
Ta bort och installera komponenter
25
Summary of Contents for Latitude 5430
