Dell Latitude 5310 Service Manual Download Page 3

Page: 3 / 115

1 Working on your computer............................................................................................................ 6

Safety instructions.................................................................................................................................................................6

2 Technology and components........................................................................................................10

3 Major components of your system ............................................................................................... 14

4 Disassembly and reassembly........................................................................................................ 16

MicroSD card........................................................................................................................................................................16

Removing the microSD card.........................................................................................................................................16
Installing the microSD card............................................................................................................................................17

SIM card tray........................................................................................................................................................................ 18

Removing the SIM card tray.........................................................................................................................................18
Installing the SIM card tray........................................................................................................................................... 19

Base cover............................................................................................................................................................................20

Removing the base cover.............................................................................................................................................20
Installing the base cover............................................................................................................................................... 22

Battery.................................................................................................................................................................................. 25

WWAN card......................................................................................................................................................................... 29

Removing the WWAN card.......................................................................................................................................... 29
Installing the WWAN card............................................................................................................................................ 30

WLAN card............................................................................................................................................................................31

Removing the WLAN card............................................................................................................................................ 31
Installing the WLAN card.............................................................................................................................................. 32

Memory modules................................................................................................................................................................. 33

Removing the memory module.................................................................................................................................... 33
Installing the memory module...................................................................................................................................... 34

Solid-state drive...................................................................................................................................................................35

Removing the M.2 SSD................................................................................................................................................ 35
Installing the M.2 SSD................................................................................................................................................... 37

Speakers............................................................................................................................................................................... 39

Removing the speakers................................................................................................................................................ 39

Contents

Summary of Contents for Latitude 5310




















































































































Search results

Summary of Contents for Latitude 5310

Reviews:

Related manuals for Latitude 5310

Brands by name

Popular brands

Dell Latitude 5310, Service Manual

Search results

Summary of Contents for Latitude 5310

Reviews:

Related manuals for Latitude 5310

Brands by name

Popular brands