Next steps
1. Replace the
.
2. Replace the
.
3. Replace the
4. Follow the procedure in
after working inside your computer
.
Heat sink
Prerequisites
1. Follow the procedure in
before working inside your computer
2. Remove the
3. Remove the
4. Remove the
.
Steps
1. Loosen the four captive screws that secure the heatsink to the system board [1].
NOTE:
Loosen the screws in the order of the callout numbers [1, 2, 3, 4] as indicated on the heatsink.
2. Lift the heatsink away from the system board [2].
Steps
1. Place the heatsink on the system board and align the screw holes on the heatsink with the screw holes on the system board [1].
Disassembly and reassembly
47
Summary of Contents for Latitude 5310
