•
Full boot: Within 22 secs after pressing the power button.
•
Below is the example timelines:
Power button with fingerprint reader will have no LED and will leverage the available LED's in the system to provide indication of the
system status
•
Power Adapter LED:
•
The LED on Power adapter connector illuminates white when power is supplied from electrical outlet.
•
Battery Indicator LED:
•
If the computer is connected to an electrical outlet, the battery light operates as follows:
1. Solid white -the battery is charging. When the charge is complete the LED turns off.
•
If the computer is running on a battery, the battery light operates as follows:
1. Off -the battery is adequately charged (or the computer is turned off).
2. Solid amber -the battery charge is critically low. A low battery state is approximately 30 minutes or less of battery life
remaining.
•
Camera LED
•
White LED activates when camera is on.
•
Mic Mute LED:
•
When activated (muted), the mic mute LED on the F4 Key should illuminate WHITE.
•
RJ45 LEDs:
•
Table 2. LED on either side of RJ45 port
Link connection indicator (LHS)
Activity indicator (RHS)
Green
Amber
Technology and components
13
Summary of Contents for Latitude 5310
