Next steps
1. Replace the
2. Replace the
NOTE:
System board can be replaced with heatsink attached.
3. Replace the
.
4. Replace the
5. Replace the
6. Replace the
7. Replace the
8. Replace the
.
9. Replace the
.
10. Replace the
.
11. Replace the
12. Replace the
13. Follow the procedure in
after working inside your computer
.
Keyboard bracket
Removing the keyboard bracket
Prerequisites
1. Follow the procedure in
before working inside your computer
2. Remove the
3. Remove the
4. Remove the
.
5. Remove the
.
6. Remove the
.
7. Remove the
.
8. Remove the
.
9. Remove the
10. Remove the
11. Remove the
.
NOTE:
System board can be removed with heatsink attached.
12. Remove the
13. Remove the
14. Remove the
Steps
1. Remove the four (M2x2) screws that secure the keyboard to the keyboard bracket [1].
2. Remove the keyboard from the keyboard bracket [2].
84
Disassembly and reassembly
Summary of Contents for Latitude 5310
