Next steps
1. Replace the
.
2. Replace the
.
3. Replace the
.
4. Replace the
5. Follow the procedure in
after working inside your computer
.
Touchpad button board
Removing the touchpad button board
Prerequisites
1. Follow the procedure in
before working inside your computer
2. Remove the
3. Remove the
4. Remove the
.
5. Remove the
.
Steps
1. Open the latch and disconnect the touchpad button board cable from the connector on the touchpad board.
2. Remove the two (M2x3) screws that secure the touchpad button bracket to the palmrest [1].
3. Lift the touchpad button board bracket away from the computer [2].
Disassembly and reassembly
57
Summary of Contents for Latitude 5310
