Dell Inspiron M5010 Service Manual Download Page 36 | Manualshive

Page: 36 / 51

background image

9.

Remove the screw that secures the Mini-Card to the connector on the system board.

10.

Lift the Mini-Card out of the connector on the system board.

Replacing the Mini-Card

1.

Follow the instructions in

Before You Begin

.

2.

Remove the new Mini-Card from its packaging.

3.

Insert the Mini-Card connector at a 45-degree angle into the connector on the system board.

4.

Press the other end of the Mini-Card down into the slot on the system board and replace the screw that secures the Mini-Card to the connector on the
system board.

5.

Connect the appropriate antenna cables to the Mini-Card you are installing. The following table provides the antenna cable color scheme for the Mini-
Card supported by your computer.

1 antenna cable connectors (2) 2 Mini-Card 3 screw

CAUTION:

Use firm and even pressure to slide the card into place. If you use excessive force, you may damage the connector.

CAUTION:

The connectors are keyed to ensure correct insertion. If you feel resistance, check the connectors on the card and on the system

board, and realign the card.

CAUTION:

To avoid damage to the Mini-Card, never place cables under the card.

Connectors on the Mini-Card Antenna Cable Color Scheme

WLAN, Wi-Fi, WiMax
(2 antenna cables)

Main (white triangle)

white

«
...
34
35
36
37
38
...
»

Summary of Contents for Inspiron M5010




















































Reviews:

No comments

Related manuals for Inspiron M5010

Brand: IBM Pages: 54

Brand: IBM Pages: 388

Brand: Aaeon Pages: 88

Brand: Steinberg Pages: 820

Brand: UUGear Pages: 25

Brand: Everex Pages: 47

Brand: Stage right Pages: 12

Brand: LDI Spaces Pages: 5

Brand: BAC Pages: 22

Brand: Corsair Pages: 16

Brand: E.E.P.D. Pages: 96

Brand: Shuttle Pages: 1

Prima XPC Barebone SX48P2 Deluxe

Brand: Shuttle Pages: 58

Brand: Shuttle Pages: 27

Brand: Adaptek Pages: 10

Brand: IEI Technology Pages: 16

Brand: Nexcom Pages: 42

Brand: Nexcom Pages: 65

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands