background image

Back to Contents Page

  

 

 Base Cover  

Dell™ Inspiron™ N5010/M5010 Service Manual 

 

  

Removing the Base Cover 

 

  

Replacing the Base Cover 

 

 

 

 

 

 

 

 

 

Removing the Base Cover  

 

 

1.

Follow the instructions in 

Before You Begin

.  

 

 

  

2.

Remove the battery (see 

Removing the Battery

).  

 

 

  

3.

Loosen the captive screw that secures the base cover to the computer base.  
 

 

  

4.

Pry the base cover with your fingers and ensure that the base cover is released from the tabs on the computer base.  
 

 

  

5.

Lift the base cover off the computer base.  
 

  

 

Replacing the Base Cover  

 

 

1.

Follow the instructions in 

Before You Begin

.  

 

 

  

2.

Slide the two tabs on the base cover into the slots on the computer base.  
 

 

  

3.

Snap the base cover into place.  
 

 

  

4.

Tighten the captive screw that secures the base cover to the computer base.  
 

 

  

5.

Replace the battery (see 

Replacing the Battery

).  

 

 

 

 

WARNING: 

Before working inside your computer, read the safety information that shipped with your computer. For additional safety best 

practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance. 

 

CAUTION: 

Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™ 

is not covered by your warranty.

 

CAUTION: 

To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal 

surface (such as a connector on your computer).

 

CAUTION: 

To help prevent damage to the system board, remove the main battery (see 

Removing the Battery

) before working inside the 

computer.

tabs (2) 

base cover 

captive screw 

 

CAUTION: 

Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may 

result in damage to the computer.

Summary of Contents for Inspiron M5010




















































Reviews: