background image

Back to Contents Page

  

 

 System Board  

Dell™ Studio 14z Service Manual 

 

  

Removing the System Board 

 

  

Replacing the System Board 

 

 

 

 

 

 

The system board's BIOS chip contains the Service Tag, which is also visible on a barcode label on the bottom of the computer. The replacement kit for the 
system board includes a CD that provides a utility for transferring the Service Tag to the replacement system board. 

 

 

 

Removing the System Board  

 

 

1.

Follow the instructions in 

Before You Begin

.  

 

 

  

2.

Remove any installed cards from the ExpressCard slot or the 8-in-1 Media Card Reader.  
 

 

  

3.

Remove the battery (see 

Removing the Battery

).  

 

 

  

4.

Remove installed memory modules (see 

Removing the Memory Module

).  

 

 

  

5.

Remove the keyboard (see 

Removing the Keyboard

).  

 

 

  

6.

Remove the hard drive (see 

Removing the Hard Drive

).  

 

 

  

7.

Remove the palm rest (see 

Removing the Palm Rest

).  

 

 

  

8.

Remove any installed Mini-Cards (see 

Communication Cards

).  

 

 

  

9.

Remove the display assembly (see 

Removing the Display Assembly

).  

 

 

  

10.

Remove the bluetooth card (see 

Removing the Bluetooth Card

).  

 

 

  

11.

Remove the speakers (see 

Removing the Speakers

).  

 

 

  

12.

Remove the tweeters (see 

Removing the Tweeters

).  

 

 

  

13.

Remove the coin-cell battery (see 

Removing the Coin-Cell Battery

).  

 

 

  

14.

Disconnect the AC adapter cable from the connector on the system board.  
 

 

  

15.

Disconnect the hall sensor cable from the connector on the system board.  
 

 

 

WARNING: 

Before working inside your computer, read the safety information that shipped with your computer. For additional safety best 

practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance. 

 

CAUTION: 

To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal 

surface (such as a connector on your computer).

 

CAUTION: 

Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™ 

is not covered by your warranty.

 

CAUTION: 

Handle components and cards by their edges, and avoid touching pins and contacts.

Summary of Contents for Inspiron Inspiron 14z






















































Reviews: