Dell Inspiron Inspiron 14z Service Manual Download Page 4

Page: 4 / 53

Ensure that the work surface is flat and clean to prevent the computer cover from being scratched.

Turn off your computer (see

Turning Off Your Computer

If the computer is connected to a docking device (docked), undock it. See the documentation that came with your docking device for instructions.

Disconnect all telephone or network cables from the computer.

Press and eject any installed cards from the ExpressCard slot or the 8-in-1 Media Card Reader.

Disconnect your computer and all attached devices from their electrical outlets.

Remove the battery (see

Removing the Battery

Turn the computer top-side up, open the display, and press the power button to ground the system board.

Back to Contents Page

CAUTION:

To disconnect a network cable, first unplug the cable from your computer and then unplug the cable from the network device.

CAUTION:

To help prevent damage to the system board, remove the main battery (see

Removing the Battery

) before working inside the

computer.

Summary of Contents for Inspiron Inspiron 14z






















































Search results

Summary of Contents for Inspiron Inspiron 14z

Reviews:

Related manuals for Inspiron Inspiron 14z

Brands by name

Popular brands

Dell Inspiron Inspiron 14z, Service Manual

Search results

Summary of Contents for Inspiron Inspiron 14z

Reviews:

Related manuals for Inspiron Inspiron 14z

Brands by name

Popular brands