manualshive.com logo in svg

Dell Inspiron Inspiron 14z, Service Manual, Page: 44 / 53

Share
Download
Dell Inspiron Inspiron 14z Service Manual Download Page 44

Back to Contents Page

  

 

 Power Button  

Dell™ Studio 14z Service Manual 

 

  

Removing the Power Button Board 

 

  

Replacing the Power Button Board 

 

 

 

 

 

 

 

Removing the Power Button Board  

 

 

1.

Follow the instructions in 

Before You Begin

.  

 

 

  

2.

Remove the battery (see 

Removing the Battery

).  

 

 

  

3.

Remove the keyboard (see 

Removing the Keyboard

).  

 

 

  

4.

Remove the hard drive (see 

Removing the Hard Drive

).  

 

 

  

5.

Remove the palm rest (see 

Removing the Palm Rest

).  

 

 

  

6.

Remove the display assembly (see 

Removing the Display Assembly

).  

 

 

  

7.

Remove the display bezel (see 

Removing the Display Bezel

).  

 

 

  

8.

Remove the display panel (see 

Removing the Display Panel

).  

 

 

  

9.

Remove the screw that secures the power button board to the display cover.  
 

  

 

 

10.

Gently remove the power button board to release it from the securing tab.  
 

 

Replacing the Power Button Board  

 

 

1.

Follow the instructions in 

Before You Begin

.  

 

 

  

2.

Replace the power button board in the securing tab on the display cover.  
 

 

  

 

WARNING: 

Before working inside your computer, read the safety information that shipped with your computer. For additional safety best 

practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance. 

 

CAUTION: 

To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal 

surface (such as a connector on your computer).

 

CAUTION: 

Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™ 

is not covered by your warranty.

1 

power button board  

2 

screw 

Summary of Contents for Inspiron Inspiron 14z






















































Reviews:

No comments