Dell Inspiron 7786 Service Manual Download

Page: 4 / 88

14 Removing the fan....................................................................................................................................... 27

Prerequisites..................................................................................................................................................................... 27
Procedure..........................................................................................................................................................................27

15 Replacing the fan....................................................................................................................................... 28

16 Removing the heat sink.............................................................................................................................. 29

Prerequisites..................................................................................................................................................................... 29
Procedure..........................................................................................................................................................................29

17 Replacing the heat sink.............................................................................................................................. 30

18 Removing the hard drive............................................................................................................................. 31

Prerequisites...................................................................................................................................................................... 31
Procedure.......................................................................................................................................................................... 31

19 Replacing the hard drive.............................................................................................................................33

20 Removing the solid-state drive/Intel Optane memory module....................................................................35

Prerequisites..................................................................................................................................................................... 35
Procedure..........................................................................................................................................................................35

21 Replacing the solid-state drive/Intel Optane memory module.....................................................................37

22 Removing the speakers..............................................................................................................................40

Prerequisites..................................................................................................................................................................... 40
Procedure..........................................................................................................................................................................40

23 Replacing the speakers...............................................................................................................................41

24 Removing the wireless card....................................................................................................................... 42

Prerequisites..................................................................................................................................................................... 42
Procedure..........................................................................................................................................................................42

Contents

Summary of Contents for Inspiron 7786

























































































Search results

Summary of Contents for Inspiron 7786

Reviews:

Related manuals for Inspiron 7786

Brands by name

Popular brands

Dell Inspiron 7786, Service Manual

Search results

Summary of Contents for Inspiron 7786

Reviews:

Related manuals for Inspiron 7786

Brands by name

Popular brands