manualshive.com logo in svg

Dell Inspiron 7786, Service Manual

Share
Download
Dell Inspiron 7786 Service Manual Download Page 42

Removing the wireless card

WARNING: 

Before working inside your computer, read the safety information that shipped with your computer and follow the 

steps in 

Before working inside your computer

. After working inside your computer, follow the instructions in 

After working inside 

your computer

. For more safety best practices, see the Regulatory Compliance home page at 

www.dell.com/

regulatory_compliance

.

Prerequisites

Remove the 

base cover

.

Procedure

1 

Locate the wireless card on the system board.

2 

Remove the screw (M2x3) that secures the wireless-card bracket to the wireless card and palm-rest assembly.

3 

Remove the wireless-card bracket from the wireless card.

4 

Disconnect the antenna cables from the wireless card.

5 

Slide and remove the wireless card from the wireless-card slot.

24

42

Removing the wireless card

Summary of Contents for Inspiron 7786

























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands