Replacing the fan
WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your computer
. After working inside your computer, follow the instructions in
. For more safety best practices, see the Regulatory Compliance home page at
Procedure
1
Using the alignment posts, place the fan on the palm-rest assembly.
2
Replace the two screws (M2x3) that secure the fan to the palm-rest assembly.
3
Connect the fan cable to the system board.
4
Route the I/O cable through the routing guides on the fan.
Post-requisites
Replace the
.
15
28
Replacing the fan
Summary of Contents for Inspiron 7786
