Removing the base cover
WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your computer
. After working inside your computer, follow the instructions in
. For more safety best practices, see the Regulatory Compliance home page at
Procedure
1
Remove the eight screws (M2x5) that secure the base cover to the palm-rest assembly.
2
Loosen the three captive screws that secure the base cover to the palm-rest assembly.
3
Using a plastic scribe, pry the base cover from the tabs on the hinges and continue to pry the base cover from the slots on the palm-
rest assembly.
CAUTION:
Do not pry the base cover from the middle as it might damage the chassis.
4
Carefully remove the base cover off the palm-rest assembly.
6
Removing the base cover
15
Summary of Contents for Inspiron 7786
