manualshive.com logo in svg

Dell Inspiron 7786, Service Manual

Share
Download
Dell Inspiron 7786 Service Manual Download Page 84

Table 13. System setup options—SupportAssist System Resolution menu

SupportAssist System Resolution

Auto OS Recovery Threshold

Control the automatic boot flow for SupportAssist System Resolution Console and for 
Dell OS Recovery tool.

SupportAssist OS Recovery

Enable or disable the boot flow for SupportAssist OS Recovery tool in the even of 
certain system errors.

Clearing CMOS settings

CAUTION: 

Clearing CMOS settings will reset the BIOS settings on your computer.

1 

Remove the 

base cover

.

2 

Disconnect the battery cable from the system board.

3 

Remove the 

coin-cell battery

.

4 

Wait for one minute.

5 

Replace the 

coin-cell battery

.

6 

Connect the battery cable to the system board.

7 

Replace the 

base cover

.

Clearing BIOS (System Setup) and System passwords

To clear the system or BIOS passwords, contact Dell technical support as described at 

www.dell.com/contactdell

.

NOTE: 

For information on how to reset Windows or application passwords, refer to the documentation accompanying Windows 

or your application.

84

System setup

Summary of Contents for Inspiron 7786

























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands