Removing the heat sink
WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your computer
. After working inside your computer, follow the instructions in
. For more safety best practices, see the Regulatory Compliance home page at
WARNING:
The heat sink may become hot during normal operation. Allow sufficient time for the heat sink to cool before you
touch it.
CAUTION:
For maximum cooling of the processor, do not touch the heat transfer areas on the heat sink. The oils in your skin can
reduce the heat transfer capability of the thermal grease.
Prerequisites
1
Remove the
2
Remove the
.
Procedure
1
In reverse order (as indicated on the heat sink), loosen the seven captive screws that secure the heat sink to the system board.
2
Lift the heat sink off the system board.
16
Removing the heat sink
29
Summary of Contents for Inspiron 7786
