Replacing the hard drive
WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your computer
. After working inside your computer, follow the instructions in
. For more safety best practices, see the Regulatory Compliance home page at
CAUTION:
Hard drives are fragile. Exercise care when handling the hard drive.
Procedure
1
Place the hard drive into the hard-drive bracket.
2
Align the screw holes on the hard-drive bracket with the screw holes on the hard drive, and then replace the four screws (M3x3) that
secure the hard-drive bracket to the hard drive.
3
Connect the interposer to the hard-drive assembly.
4
Align the screw holes on the hard-drive assembly with the screw holes on the palm-rest assembly.
5
Replace the three screws (M2x3) that secure the hard-drive assembly to the palm-rest assembly.
6
Connect the hard-drive cable to the system board.
19
Replacing the hard drive
33
Summary of Contents for Inspiron 7786
