Dell Inspiron 7000, Reference And Troubleshooting Manual

Page: 39 / 161

Customizing System Features 2-11
Save-to-RAM (the default) suspend mode conserves battery power by stopping
almost all computer activity, but leaves the computer ready to resume operations in
seconds. Select the
Save-to-RAM option whenever you leave the computer unat-
tended for more than a few minutes. Resume normal computer activity by pressing
the power button (the computer may take several seconds to return to normal
operation).
Save-to-disk suspend mode copies all system data to a reserved area on the hard-
disk drive and then turns off all power to the computer. When you resume normal
operation, the same programs will be running and the same files will be open that
were loaded before you activated this mode. Use
Save-to-disk suspend mode to
conserve battery power or to preserve system data by quickly saving it to the hard-
disk drive if you are about to run out of battery power.
5HVXPHRQ0RGHP5LQJ
Setting this option to Enabled (the default) tells the computer to resume normal oper-
ation when an incoming call is detected by a modem and the computer is in standby
mode.
5HVXPHRQ7LPHRI'D\
When the Resume on Time of Day option is set to Enabled , the computer resumes
normal operation at the time specified in the Resume Time field after being in
standby mode. The default for this option is Disabled .
5HVXPH7LPH
Resume Time lets you specify a time when the computer should get out of standby
mode and resume normal operation.
%RRW0HQX2SWLRQV
The following subsections explain each option in the Boot menu of the Setup pro-
gram (Figure 2-5). The selections you make in this menu determine which disk device
the computer uses to find the software needed to start the operating system. The
same information is also available in the topic titled “Boot Menu” in the
System
User’s Guide.