Dell Inspiron 5591 2n1 Service Manual Download Page 40 | Manualshive

Page: 40 / 61

background image

Procedure

1. Align the screw holes on the system board with the screw holes on the palm-rest and keyboard assembly.
2. Replace the five screws (M2x2) that secure the system board to the palm-rest and keyboard assembly.

3. Slide the I/O-board cable into the connector on the system board and close the latch to secure the cable.
4. Connect the power-adapter port cable to the system board.
5. Align the screw holes on the USB Type-C port bracket with the screw holes on the system board.
6. Replace the two screws (M2x3) that secure the USB Type-C port bracket to the system board.
7. Connect the speaker cable to the system board.
8. Slide the keyboard cable into the connector on the system board and close the latch to secure the cable.
9. Slide the touchpad cable into the connector on the system board and close the latch to secure the cable.
10. Slide the hard-drive cable into the connector on the system board and close the latch to secure the cable.
11. Connect the coin-cell battery to the system board.

Post-requisites

display assembly

.

40

Removing and installing components

«
...
38
39
40
41
42
...
»

Summary of Contents for Inspiron 5591 2n1






























































Reviews:

No comments

Related manuals for Inspiron 5591 2n1

83135CU - NetVista A30 - 8313

Brand: IBM Pages: 54

Brand: Compaq Pages: 18

Brand: Avalue Technology Pages: 78

FieldGo PCATX-R9

Brand: BSi Pages: 40

Brand: Advantech Pages: 84

Brand: Zotac Pages: 57

Precision R5400

Brand: Dell Pages: 111

Brand: Dell Pages: 72

Integrated Touchscreen Computer J2 650

Brand: J2 Pages: 78

Brand: Lenovo Pages: 10

Brand: Lenovo Pages: 54

Brand: Lenovo Pages: 56

Brand: Lenovo Pages: 62

Brand: Lenovo Pages: 66

Brand: Lenovo Pages: 70

Brand: Lenovo Pages: 70

ThinkCentre M93/p

Brand: Lenovo Pages: 2

Brand: Lenovo Pages: 85

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands