Dell Inspiron 5591 2n1 Service Manual Download Page 54 | Manualshive

Page: 54 / 61

background image

POST Behavior

Enable Adapter Warnings

Enables the computer to display adapter warning messages during boot.

Default: ON.

Extend BIOS POST Time

Configures the BIOS POST (Power-On Self-Test) load time.

Default: 0 seconds.

Fastboot

Configures the speed of the UEFI boot process.

Default: Thorough. Performs complete hardware and configuration initialization during
boot.

Fn Lock Options

Enables or disables the Fn lock mode.

Default: ON.

Lock Mode

Default: Lock Mode Secondary. Lock Mode Secondary = If this option is selected, the
F1-F12 keys scan the code for their secondary functions.

Pull Screen Logo

Enabled or disabled the computer to display full screen logo if the image match
screen resolution.

Default: OFF.

Warnings and Errors

Selects an action on encountering a warning or error during boot.

Default: Prompt on Warnings and Errors. Stop, prompt and wait for user input when
warnings or errors are detected.

NOTE:

Errors deemed critical to the operation of the computer hardware

will always halt the computer.

Table 15. System setup options—Virtualization menu

Virtualization

Intel Virtualization Technology

Enables the computer to run a virtual machine monitor (VMM).

Default: ON.

VT for Direct I/O

Enables the computer to perform Virtualization Technology for Direct I/O (VT-d).
VT-d is an Intel method that provides virtualization for memory map I/O.

Default: ON.

Table 16. System setup options—Maintenance menu

Maintenance

Asset Tag

Creates a system Asset Tag that can be used by an IT administrator to uniquely
identify a particular system. Once set in BIOS, the Asset Tag cannot be changed.

Service Tag

Displays the Service Tag of the computer.

BIOS Recovery from Hard Drive

Enables the computer to recover from a bad BIOS image, as long as the Boot Block
portion is intact and functioning.

Default: ON.

NOTE:

BIOS recovery is designed to fix the main BIOS block and cannot

work if the Boot Block is damaged. In addition, this feature cannot work
in the event of EC corruption, ME corruption, or a hardware issue. The
recovery image must exist on an unencrypted partition on the drive.

BIOS Auto-Recovery

Enables the computer to automatically recover the BIOS without user actions. This
feature requires BIOS Recovery from Hard Drive to be set to Enabled.

Default: OFF.

54

System setup

«
...
52
53
54
55
56
...
»

Summary of Contents for Inspiron 5591 2n1






























































Reviews:

No comments

Related manuals for Inspiron 5591 2n1

Brand: IBM Pages: 170

Brand: IBM Pages: 257

Brand: IBM Pages: 63

Deep Silence 6 Revision B

Brand: Nanoxia Pages: 24

320-00-00010-01

Brand: Life Fitness Pages: 36

Brand: Gateway Pages: 144

Brand: Asus Pages: 80

Brand: Asus Pages: 35

Brand: Asus Pages: 56

Brand: Asus Pages: 35

Brand: Asus Pages: 69

Brand: Asus Pages: 28

Brand: Asus Pages: 28

Brand: Asus Pages: 35

Brand: Asus Pages: 2

Chromebox CN Series

Brand: Asus Pages: 34

Brand: Asus Pages: 2

Brand: Asus Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands