Dell Inspiron 5591 2n1 Service Manual Download Page 55

Page: 55 / 61

Maintenance

Start Data Wipe

CAUTION:

This Secure Wipe Operation will delete information in a way

that it cannot be reconstructed.

If enabled, the BIOS will queue up a data wipe cycle for storage devices that are
connected to the motherboard on the next reboot.

Default: OFF.

Allow BIOS Downgrade

Controls flashing of the system firmware to previous revisions.

Default: ON.

Dell Development Configuration

Enables flash update signature override.

Default: OFF.

Table 17. System setup options—System Logs menu

System Logs

Power Event Log

Displays Power events.

Default: Keep.

BIOS Event Log

Displays BIOS events.

Default: Keep.

Thermal Event Log

Displays Thermal events.

Default: Keep.

Table 18. System setup options—SupportAssist menu

SupportAssist

Dell Auto OS Recovery Threshold

Controls the automatic boot flow for SupportAssist System Resolution Console and
for Dell operating system Recovery tool.

Default: 2.

SupportAssist OS Recovery

Enables or disables the boot flow for SupportAssist operating system Recovery tool
in the even of certain system errors.

Default: ON.

Clearing CMOS settings

CAUTION:

Clearing CMOS settings will reset the BIOS settings on your computer.

1. Remove the

base cover

2. Disconnect the battery cable from the system board.
3. Remove the

coin-cell battery

4. Wait for one minute.
5. Replace the

coin-cell battery

6. Connect the battery cable to the system board.
7. Replace the

base cover

Clearing BIOS (System Setup) and System
passwords

To clear the system or BIOS passwords, contact Dell technical support as described at

www.dell.com/contactdell

System setup

Summary of Contents for Inspiron 5591 2n1






























































Search results

Summary of Contents for Inspiron 5591 2n1

Reviews:

Related manuals for Inspiron 5591 2n1

Brands by name

Popular brands

Dell Inspiron 5591 2n1, Service Manual

Search results

Summary of Contents for Inspiron 5591 2n1

Reviews:

Related manuals for Inspiron 5591 2n1

Brands by name

Popular brands