background image

The one-time boot menu displays the devices that you can boot from including the diagnostic option. The boot menu options are:

Removable Drive (if available)

STXXXX Drive (if available)

NOTE: 

XXX denotes the SATA drive number.

Optical Drive (if available)

SATA Hard Drive (if available)

Diagnostics

NOTE: 

Choosing Diagnostics, will display the ePSA diagnostics screen.

The boot sequence screen also displays the option to access the System Setup screen.

System setup options

NOTE: 

Depending on this computer and its installed devices, the items that are listed in this section may or may not be 

displayed.

Table 3. System setup options—System information menu

Overview

BIOS Version

Displays the BIOS version number.

Service Tag

Displays the Service Tag of the computer.

Asset Tag

Displays the Asset Tag of the computer.

Ownership Tag

Displays the ownership tag of the computer.

Manufacture Date

Displays the manufacture date of the computer.

Ownership Date

Displays the ownership date of the computer.

Express Service Code

Displays the express service code of the computer.

Ownership Tag

Displays the ownership tag of the computer.

Signed Firmware Update

Displays whether the signed firmware update is enabled.

Battery

Displays the battery health information.

Primary

Displays the primary battery.

Battery Level

Displays the battery level.

Battery State

Displays the battery state.

Health

Displays the battery health.

AC Adapter

Displays whether an AC adapter is installed.

Processor Information

Processor Type

Displays the processor type.

Maximum Clock Speed

Displays the maximum processor clock speed.

Core Count

Displays the number of cores on the processor.

Processor L2 Cache

Displays the processor L2 Cache size.

Processor ID

Displays the processor identification code.

Processor L3 Cache

Displays the processor L3 Cache size.

Current Clock Speed

Displays the current processor clock speed.

Minimum Clock Speed

Displays the minimum processor clock speed.

Microcode Version

Displays the microcode version.

48

System setup

Summary of Contents for Inspiron 5591 2n1






























































Reviews: