Dell Inspiron 5591 2n1 Service Manual Download Page 34 | Manualshive

Page: 34 / 61

background image

Prerequisites

.

Procedure

1. Peel off the tape that secures the fan cable to the palm-rest and keyboard assembly.
2. Disconnect the fan cable from the system board.
3. Open the latch, and disconnect the I/O cable from the system board.
4. Peel off the tape that secures the antenna cable to the palm-rest and keyboard assembly.
5. Peel off the tape that secures the touchscreen cable and the display cable to their respective connectors on the system board.
6. Open the latch, and disconnect the touchscreen cable from the system board.
7. Open the latch, and disconnect the display cable from the system board.

8. Turn the computer over, and open the display as far as possible. Then place the computer face down on a flat surface.

CAUTION:

Place the computer on a soft and clean surface to avoid scratching the display.

9. Remove the antenna cables from the routing guides on the palm-rest and keyboard assembly.
10. Remove the six screws (M2.5x5) that secure the display assembly to the palm-rest and keyboard assembly.
11. Gently lift the display assembly off the palm-rest and keyboard assembly.

34

Removing and installing components

«
...
32
33
34
35
36
...
»

Summary of Contents for Inspiron 5591 2n1






























































Reviews:

No comments

Related manuals for Inspiron 5591 2n1

Brand: Ohio Scientific Pages: 43

PC 300PL Types 6862

Brand: IBM Pages: 112

Brand: IBM Pages: 27

UC-8100-ME-T Series

Brand: Moxa Technologies Pages: 22

Brand: C&T Pages: 73

Brand: Kettler Pages: 44

eBOX625-842-FL Series

Brand: AXIOMTEK Pages: 60

Brand: Newport Pages: 55

ProArt PA Series

Brand: Asus Pages: 40

Brand: Asus Pages: 46

Brand: Asus Pages: 80

Brand: Asus Pages: 76

Brand: Asus Pages: 75

Brand: Asus Pages: 44

Brand: Asus Pages: 90

Brand: Asus Pages: 56

P5G43 V4-Series

Brand: Asus Pages: 110

Brand: Asus Pages: 44

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands