manualshive.com logo in svg

Dell INSPIRON 530s Series, Owner'S Manual, Page: 81 / 222

Share
Download
Dell INSPIRON 530s Series Owner'S Manual Download Page 81

Solving Problems

81

Video and Monitor Problems

 

CAUTION: 

Before you begin any of the procedures in this section, follow the 

safety instructions in the 

Product Information Guide

.

 

NOTE: 

See the monitor documentation for troubleshooting procedures.

If the screen is blank

C

HECK

 

THE

 

MONITOR

 

CABLE

 

CONNECTION

—

• Ensure that the graphics cable is connected as shown on the setup diagram for 

your computer.
If an optional video card is installed, check that the monitor cable is connected to 
the card, rather than the video connector on the system board.

• If you are using a graphics extension cable and removing the cable solves the 

problem, the cable is defective.

• Swap the computer and monitor power cables to determine whether the power 

cable is defective.

• Check the connector for bent or broken pins. (It is normal for monitor cable 

connectors to have missing pins.)

C

HECK

 

THE

 

MONITOR

 

POWER

 

LIGHT

—

If the power light is off, firmly press the 

button to ensure that the monitor is turned on. If the power light is lit or blinking, 
the monitor has power. If the power light is blinking, press a key on the keyboard or 
move the mouse.

T

EST

 

THE

 

ELECTRICAL

 

OUTLET

—

Ensure that the electrical outlet is working by 

testing it with another device, such as a lamp.

C

HECK

 

THE

 

DIAGNOSTIC

 

LIGHTS

—

See "Beep Codes" on page 84.

book.book  Page 81  Monday, October 6, 2008  11:38 AM

Summary of Contents for INSPIRON 530s Series































































































































































































































Reviews:

No comments