manualshive.com logo in svg

Dell INSPIRON 530s Series, Owner'S Manual, Page: 146 / 222

Share
Download
Dell INSPIRON 530s Series Owner'S Manual Download Page 146

146

Removing and Installing Parts

9

Lift the floppy drive to separate it from the FlexBay drive cage.

10

Slide the FlexBay drive cage in the FlexBay slot till it snaps in place.

11

Install the FlexBay drive insert (see "Replacing the FlexBay Drive Panel 
Insert" on page 150).

12

Replace the CD/DVD drive (see "Installing a CD/DVD Drive" on page 155).

13

Replace the bezel (see "Replacing the Bezel" on page 136).

14

Replace the computer cover (see "Replacing the Computer Cover" on 
page 174).

15

Connect your computer and devices to electrical outlets, and then turn 
them on.

16

Check the system setup for the appropriate diskette Drive Option changes 
(see "Entering System Setup" on page 185).

book.book  Page 146  Monday, October 6, 2008  11:38 AM

Summary of Contents for INSPIRON 530s Series































































































































































































































Reviews:

No comments