manualshive.com logo in svg

Dell INSPIRON 530s Series, Owner'S Manual, Page: 190 / 222

Share
Download
Dell INSPIRON 530s Series Owner'S Manual Download Page 190

190

Appendix

3

When 

F2 = Setup, F12 = Boot Menu 

appears in the upper-right 

corner of the screen, press <F12>.

If you wait too long and the operating system logo appears, continue to 
wait until you see the Microsoft Windows desktop. Then, shut down your 
computer and try again.
The 

Boot Device Menu

 appears, listing all available boot devices. 

Each device has a number next to it. 

4

At the bottom of the menu, enter the number of the device that is to be 
used for the current boot only.

For example, if you are booting to a USB memory key, highlight 

USB 

Flash Device

 and press <Enter>.

 

NOTE: 

To boot to a USB device, the device must be bootable. To ensure your 

device is bootable, check the device documentation.

Changing Boot Sequence for Future Boots

1

Enter system setup (see "Entering System Setup" on page 185).

2

Use the arrow keys to highlight the 

Boot Sequence

 menu option and press 

<Enter> to access the menu.

 

NOTE: 

Write down your current boot sequence in case you want to restore it.

3

Press the up- and down-arrow keys to move through the list of devices.

4

Press the spacebar to enable or disable a device (enabled devices have 
a checkmark).

5

Press plus (+) or minus (–) to move a selected device up or down the list.

Clearing Forgotten Passwords

 

CAUTION: 

Before you begin any of the procedures in this section, follow the 

safety instructions located in the 

Product Information Guide

.

1

Follow the procedures in "Before You Begin" on page 103.

2

Remove the computer cover (see "Removing the Computer Cover" on 
page 105).

3

Locate the 3-pin password connector (PSWD) on the system board. 

NOTE: 

The location of the password connector may vary depending on the system.

book.book  Page 190  Monday, October 6, 2008  11:38 AM

Summary of Contents for INSPIRON 530s Series































































































































































































































Reviews:

No comments