manualshive.com logo in svg

Dell INSPIRON 530s Series, Owner'S Manual, Page: 164 / 222

Share
Download
Dell INSPIRON 530s Series Owner'S Manual Download Page 164

164

Removing and Installing Parts

Removing the Processor Fan/Heat Sink Assembly

 

NOTICE: 

Do not touch the fan blades when you are removing the processor 

fan/heat sink assembly. This could damage the fan.

1

Follow the procedures in "Before You Begin" on page 103.

2

Remove the computer cover (see "Removing the Computer Cover" on 
page 105).

3

Disconnect the processor fan cable from the system board (see "Inside 
View of Your Computer" on page 108).

4

Carefully move away any cables that are routed over the processor fan/heat 
sink assembly. 

5

Loosen the four captive screws securing the processor fan/heat sink 
assembly and lift it straight up.

 

CAUTION: 

Despite having a plastic shield, the heat sink fan assembly may be 

very hot during normal operation. Be sure that it has had sufficient time to cool 
before you touch it.

 

NOTE: 

The processor fan/heat sink assembly in your computer may not look 

exactly like the one shown in the illustration above.

1

processor fan/heat sink assembly

1

book.book  Page 164  Monday, October 6, 2008  11:38 AM

Summary of Contents for INSPIRON 530s Series































































































































































































































Reviews:

No comments