manualshive.com logo in svg

Dell INSPIRON 530s Series, Owner'S Manual, Page: 165 / 222

Share
Download
Dell INSPIRON 530s Series Owner'S Manual Download Page 165

Removing and Installing Parts

165

Installing the Processor Fan/Heat Sink Assembly

 

NOTICE: 

When reinstalling the fan, ensure that you do not pinch the wires that run 

between the system board and the fan.

1

Align the captive screws on the processor fan/heat sink assembly to the 
four metal screw hole projections on the system board.

 

NOTE: 

The processor fan/heat sink assembly in your computer may not look 

exactly like the one shown in the illustration above.

2

Tighten the four captive screws.

 

NOTE: 

Ensure that the processor fan/heat sink assembly is correctly seated 

and secure.

3

Connect the processor fan/heat sink assembly cable to the CPU_FAN 
system board connector (see "Inside View of Your Computer" on 
page 108). 

4

Replace the computer cover (see "Replacing the Computer Cover" on 
page 174).

5

Connect your computer and devices to an electrical outlet, and turn them on. 

1

captive screws (4)

2

processor fan/heat sink assembly

2

1

book.book  Page 165  Monday, October 6, 2008  11:38 AM

Summary of Contents for INSPIRON 530s Series































































































































































































































Reviews:

No comments