manualshive.com logo in svg

Dell INSPIRON 530s Series, Owner'S Manual, Page: 133 / 222

Share
Download
Dell INSPIRON 530s Series Owner'S Manual Download Page 133

Removing and Installing Parts

133

12

If you installed a sound card:

a

Enter system setup (see "System Setup" on page 185), go to 

Onboard 

Devices

 and select 

Integrated

 

Audio

, and then change the setting to 

Off

.

b

Connect external audio devices to the sound card’s connectors. 
Do not connect external audio devices to the microphone, 
speaker/headphone, or line-in connectors on the back panel. See "Back 
Panel Connectors" on page 23.

13

If you installed an add-in network adapter and want to disable the 
integrated network adapter:

a

Enter system setup (see "System Setup" on page 185), go to 

Onboard 

Devices

 and select 

Integrated NIC,

 and then change the setting to 

Off

.

b

Connect the network cable to the add-in network adapter’s 
connectors. Do not connect the network cable to the integrated 
connector on the back panel. See "Back Panel Connectors" on page 23.

14

Install any drivers required for the card as described in the card 
documentation.

Removing a PCI/PCI Express Card

1

Follow the procedures in "Before You Begin" on page 103.

2

Remove the computer cover. See "Removing the Computer Cover" on 
page 105.

3

Remove the support bracket. See "Removing the Support Bracket" on 
page 106.

4

If necessary, disconnect any cables connected to the card. 

•

For PCI card, grasp the card by its top corners, and ease it out of its 
connector.

•

For PCI Express card, pull the securing tab, grasp the card by its top 
corners, and then ease it out of its connector.

5

If you are removing the card permanently, install a filler bracket in the 
empty card-slot opening.

 

NOTE: 

Installing filler brackets over empty card-slot openings is necessary to 

maintain FCC certification of the computer. The brackets also keep dust and 
dirt out of your computer.

book.book  Page 133  Monday, October 6, 2008  11:38 AM

Summary of Contents for INSPIRON 530s Series































































































































































































































Reviews:

No comments