manualshive.com logo in svg

Dell INSPIRON 530s Series, Owner'S Manual, Page: 151 / 222

Share
Download
Dell INSPIRON 530s Series Owner'S Manual Download Page 151

Removing and Installing Parts

151

4

Remove the CD/DVD drive (see "Removing a CD/DVD Drive" on 
page 154).

5

Disconnect the FlexBay USB cable and the power cable from the back of 
the Media Card Reader and from the internal USB connector on the 
system board (see "System Board Components" on page 109).

6

Press the two spring clamps and slide out the Media Card Reader along 
with the FlexBay drive cage from the FlexBay slot.

7

Remove the two screws securing the Media Card Reader in the Flexbay 
drive cage.

8

Lift the Media Card Reader to separate it from the FlexBay drive cage.

9

Slide the FlexBay drive cage in the FlexBay slot till it snaps in place.

10

If you are not reinstalling the Media Card Reader, replace the drive panel 
insert, as needed.

1

media card reader

2

screws (2)

3

spring clamp (2)

*1

*

Not present on all computers.

3

2

book.book  Page 151  Monday, October 6, 2008  11:38 AM

Summary of Contents for INSPIRON 530s Series































































































































































































































Reviews:

No comments