Dell Inspiron 3910 Service Manual Download Page 62

Page: 62 / 75

Table 8. System setup options—Display menu

Display

Primary Display

Video Primary Display

Set or change the primary video controller when multi controllers are available
in the system.

By default, Auto is selected.

Brightness on battery power

Sets the screen brightness when the computer is running on battery power.

Default: 50

Full Screen Logo

Full Screen Logo

Displays the full screen logo if the screen resolution matches the image of the
logo.

Default: OFF

Table 9. System setup options—Connection menu

Connection

Network Controller Configuration

Integrated NIC

Controls the onboard LAN controller.

By default, Enable with PXE is selected.

Wireless Device Enable

WLAN

Enables or disables the internal WLAN device.

Default: ON

Bluetooth®

Enables or disables the internal Bluetooth® device.

Default: ON

Enable UEFI Network Stack

Enable UEFI Network Stack

Enable or disable UEFI Network Stack.

Default: ON

HTTP(s) Boot Feature

Enables or disables internal speaker.

By default, Enable Internal Speaker is selected.

HTTP(s) Boot

Enables or disables HTTP(s) Boot Feature.

Default: ON

HTTP(s) Boot Modes

Configure the HTTP(s) Boot Mode. Auto Mode will extract Boot URL from
the Dynamic Host Configuration Protocol (DHCP). Manual mode reads user-
provided Boot URL.

By default, Auto Mode is selected.

Table 10. System setup options—Power menu

Power

USB Wake Support

Enable USB Wake Support

Enables USB devices like a mouse or keyboard to wake the system from
Standby, Hibernation, or Power Off state.

Default: ON

AC Behavior

System setup

Summary of Contents for Inspiron 3910












































































Search results

Summary of Contents for Inspiron 3910

Reviews:

Related manuals for Inspiron 3910

Brands by name

Popular brands

Dell Inspiron 3910, Service Manual

Search results

Summary of Contents for Inspiron 3910

Reviews:

Related manuals for Inspiron 3910

Brands by name

Popular brands