Dell Inspiron 3910 Service Manual Download Page 13

Page: 13 / 75

NOTE:

Dell provides a list of components and their part numbers for the original system configuration purchased. These

parts are available according to warranty coverages purchased by the customer. Contact your Dell sales representative for
purchase options.

Left-side cover

Removing the left-side cover

Prerequisites

1. Follow the procedure in

Before working inside your computer

About this task

The following image(s) indicate the location of the left-side cover and provides a visual representation of the removal
procedure.

Steps

1. Remove the two screws (6-32) that secure the left-side cover to the chassis.
2. Holding the tab on the left-side cover firmly, slide and remove the left-side cover from the chassis.

Removing and installing components

Summary of Contents for Inspiron 3910












































































Search results

Summary of Contents for Inspiron 3910

Reviews:

Related manuals for Inspiron 3910

Brands by name

Popular brands

Dell Inspiron 3910, Service Manual

Search results

Summary of Contents for Inspiron 3910

Reviews:

Related manuals for Inspiron 3910

Brands by name

Popular brands