Dell Inspiron 3580 Service Manual Download Page 58

Page: 58 / 109

Removing the display assembly

WARNING:

Before working inside your computer, read the safety information that shipped with your computer and follow the

steps in

Before working inside your computer

. After working inside your computer, follow the instructions in

After working inside

your computer

. For more safety best practices, see the Regulatory Compliance home page at

www.dell.com/

regulatory_compliance

Prerequisites

Remove the

optical drive

Remove the

base cover

Remove the

wireless card

Procedure

Lift the latch and disconnect the optical-drive connector-board cable from the system board.

Lift the latch and disconnect the optical-drive connector-board cable from the optical-drive board connector.

Lift the optical-drive connector-board cable off the system board.

Open the latch and disconnect the display cable from the system board.

Note the routing of the display cable and remove the cable from its routing guides on the fan and palm rest and keyboard assembly.

Remove the five screws (M2.5x5) that secure the left and right hinges to the system board and palm rest and keyboard assembly.

Open the hinges.

Removing the display assembly

Summary of Contents for Inspiron 3580














































































































Search results

Summary of Contents for Inspiron 3580

Reviews:

Related manuals for Inspiron 3580

Brands by name

Popular brands

Dell Inspiron 3580, Service Manual

Search results

Summary of Contents for Inspiron 3580

Reviews:

Related manuals for Inspiron 3580

Brands by name

Popular brands