Dell Inspiron 3580 Service Manual Download Page 103

Page: 103 / 109

Intel Software Guard Extensions

Default: Thorough.

Extend BIOS POST Time

Configure additional pre-boot delay.

Full Screen Logo

Enable or disable to display full screen logo.

Warnings and Errors

Sets the boot process to pause when Warnings or Errors are detected.

Sign of Life Indication

Enable or disable to indicate during POST time that the power button press is
acknowledged in a manner the user can either hear of feel.

Table 9. System setup options—Virtualization Support menu

Virtualization Support

Virtualization

Specify whether a Virtual Machine Monitor (VMM) can utilize the additional hardware
capabilities provided by Intel Virtualization Technology.

VT for Direct I/O

Specify whether a Virtual Machine Monitor (VMM) can utilize the additional hardware
capabilities provided by Intel Virtualization Technology for Direct I/O.

Table 10. System setup options—Wireless menu

Wireless

Wireless Switch

Determine which wireless devices can be controlled by the Wireless Switch.

Wireless Device Enable

Enable or disable internal wireless devices.

Table 11. System setup options—Maintenance menu

Maintenance

Service Tag

Display the system’s Service Tag.

Asset Tag

Create a system Asset Tag.

BIOS Downgrade

Control flashing of the system firmware to previous revisions.

Data Wipe

Enable to securely erase data from all internal storage devices.

BIOS Recovery

Enable the user to recover from certain corrupted BIOS conditions from a recovery
file on the user primary hard drive or an external USB key.

Table 12. System setup options—System Logs menu

System Logs

BIOS Events

Display BIOS events.

Thermal Events

Display Thermal events.

Power Events

Display Power events.

Table 13. System setup options—SupportAssist System Resolution menu

SupportAssist System Resolution

Auto OS Recovery Threshold

Control the automatic boot flow for SupportAssist System Resolution Console and for
Dell OS Recovery tool.

SupportAssist OS Recovery

Enable or disable the boot flow for SupportAssist OS Recovery tool in the even of
certain system errors.

System setup

103

Summary of Contents for Inspiron 3580














































































































Search results

Summary of Contents for Inspiron 3580

Reviews:

Related manuals for Inspiron 3580

Brands by name

Popular brands

Dell Inspiron 3580, Service Manual

Search results

Summary of Contents for Inspiron 3580

Reviews:

Related manuals for Inspiron 3580

Brands by name

Popular brands