manualshive.com logo in svg

Dell Inspiron 3480, Service Manual, Page: 88 / 138

Share
Download
Dell Inspiron 3480 Service Manual Download Page 88

Identifier

GUID-0C3EE813-46D4-4A46-9435-5A8AE8783F68

Status

Released

Replacing the power button with fingerprint 

reader

WARNING: 

Before working inside your computer, read the safety information that shipped with your computer and follow the 

steps in 

Before working inside your computer

. After working inside your computer, follow the instructions in 

After working inside 

your computer

. For more safety best practices, see the Regulatory Compliance home page at 

www.dell.com/

regulatory_compliance

.

NOTE: 

Applicable only for computers that are shipped with fingerprint reader.

Identifier

GUID-53F119EC-28A7-48F7-943E-D560FCFAD344

Status

Released

Procedure 

1 

Using the alignment posts, align and place the power button on the palm rest and keyboard assembly.

2 

Place the power-button with fingerprint-reader board onto the slot on the palm rest and keyboard assembly.

3 

Adhere the fingerprint reader cable on the palm rest and keyboard assembly.

37

88

Replacing the power button with fingerprint reader

Summary of Contents for Inspiron 3480











































































































































Reviews:

No comments