Dell Inspiron 3480 Service Manual Download Page 79

Page: 79 / 138

Identifier

GUID-B54497E8-5AD5-4FF9-AD4A-F32FDBEDE1E8

Status

Released

Removing the system board

WARNING:

Before working inside your computer, read the safety information that shipped with your computer and follow the

steps in

Before working inside your computer

. After working inside your computer, follow the instructions in

After working inside

your computer

. For more safety best practices, see the Regulatory Compliance home page at

www.dell.com/

regulatory_compliance

NOTE:

Your computer’s Service Tag is stored in the system board. You must enter the Service Tag in the BIOS setup program

after you replace the system board.

NOTE:

Replacing the system board removes any changes you have made to the BIOS using the BIOS setup program. You must

make the appropriate changes again after you replace the system board.

NOTE:

Before disconnecting the cables from the system board, note the location of the connectors so that you can reconnect

the cables correctly after you replace the system board.

Identifier

GUID-7734CD28-6469-4978-A7E6-290DEA34B420

Status

Released

Prerequisites

Remove the

Remove the

Remove the

Remove the

Remove the

Remove the

Remove the

solid-state drive/Intel Optane

Identifier

GUID-326FF3A3-1C1B-4D4F-9A39-623872C5F78B

Status

Released

Procedure

Disconnect the speaker cable from the system board.

Open the latch and disconnect the keyboard from the system board.

Open the latch and disconnect the keyboard back-light cable from the system board.

Open the latch and disconnect the touchpad cable from the system board.

Open the latch and disconnect the hard-drive cable from the system board.

Open the latch and disconnect the I/O board cable from the system board.

Open the latch and disconnect the finger-print reader cable from the system board.

Open the latch and disconnect the power-button board cable from the system board.

Disconnect the power-adapter port cable from the system board.

Removing the system board

Summary of Contents for Inspiron 3480











































































































































Search results

Summary of Contents for Inspiron 3480

Reviews:

Related manuals for Inspiron 3480

Brands by name

Popular brands

Dell Inspiron 3480, Service Manual

Search results

Summary of Contents for Inspiron 3480

Reviews:

Related manuals for Inspiron 3480

Brands by name

Popular brands