manualshive.com logo in svg

Dell Inspiron 3480, Service Manual, Page: 19 / 138

Share
Download
Dell Inspiron 3480 Service Manual Download Page 19

Identifier

GUID-27446428-82D7-4881-9220-9EB090B046EA

Status

Released

Replacing the base cover

WARNING: 

Before working inside your computer, read the safety information that shipped with your computer and follow the 

steps in 

Before working inside your computer

. After working inside your computer, follow the instructions in 

After working inside 

your computer

. For more safety best practices, see the Regulatory Compliance home page at 

www.dell.com/

regulatory_compliance

.

Identifier

GUID-0D445AA1-0B47-41FF-B01E-E3A6153DE152

Status

Released

Procedure

1 

Connect the battery cable to the system board, if applicable.

CAUTION: 

To avoid accidental damage to the power-adapter port, do not press the base cover against the power-

adapter port when you snap the base cover to the computer base.

2 

Place the base cover on the palm-rest and keyboard assembly.

7

Replacing the base cover

19

Summary of Contents for Inspiron 3480











































































































































Reviews:

No comments