Replacing the 3.5-inch hard drive
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
. After working inside your computer, follow
the instructions in
After working inside your computer
. For more safety best
practices, see the Regulatory Compliance home page at
.
Procedure
1
Slide the hard drive into the hard-drive bracket.
2
Align the screw holes on the hard drive with the screw holes on the hard-drive
bracket.
3
Replace the two screws (#6-32xL3.6) that secure the hard-drive bracket to the
hard drive.
4
Turn the hard-drive assembly over.
5
Slide the hard-drive assembly into the drive cage.
6
Replace the two screws (#6-32xL6.35) that secure the hard-drive assembly to
the drive cage.
7
Connect the power cable and data cable to the hard-drive assembly.
Post-requisites
Replace the
.
31
Summary of Contents for Inspiron 3472
