Dell Inspiron 3472 Service Manual Download Page 74

Page: 74 / 82

Advanced

SupportAssist OS Recovery

The SupportAssist OS Recovery option

will enable or disable the boot flow for

SupportAssist OS Recovery tool in the

event of certain system errors. If the

SupportAssist OS Recovery setup option

is set to disabled then all automatic boot

flow for SupportAssist OS Recovery tool

will be disabled.
Default: Disabled

Table 4. System setup options—Security menu

Security

Unlock Setup Status

Displays if the setup status is
unlocked.

Admin Password Status

Displays whether the admin password
is set.

System Password Status

Displays whether the system password
is set.

HDD Password Status

Displays if the hard drive password is
set.

Admin Password

Enables you to set the admin
password.

System Password

Enables you to set the system
password.

HDD Password

Enables you to set the hard drive
password.

Password Change

Enable or disable changes to the
System and Hard Disk passwords
when an administrator password is set.

Computrace

Enable or disable tracking assets and
providing recovery services in the
event the computer is lost or stolen.
Default: Deactivate

Firmware TPM

Enables you to enable or disable the
firmware TPM function.

Summary of Contents for Inspiron 3472



















































































Search results

Summary of Contents for Inspiron 3472

Reviews:

Related manuals for Inspiron 3472

Brands by name

Popular brands

Dell Inspiron 3472, Service Manual

Search results

Summary of Contents for Inspiron 3472

Reviews:

Related manuals for Inspiron 3472

Brands by name

Popular brands