Dell Inspiron 3472 Service Manual Download Page 73

Page: 73 / 82

Advanced

Default: Software Controlled

Intel Software Guard Extensions
allocated memory size

Displays the allocated memory size for
Intel Software Guard Extensions.

BIOS Recovery from Hard Drive

Enables you to enable or disable BIOS
Recovery from hard drive.
Default: Enabled

BIOS Auto-Recovery

Enable or disable BIOS Auto-Recovery.
Default: Disabled

Always Perform Integrity Check

Enable or disable Always Perform
Integrity Check.
Default: Disabled

USB Configuration

Front USB Ports

Enables you to enable or disable the front
USB ports.

Rear USB Ports

Enables you to enable or disable the rear
USB ports.

Power Options

Wake Up by Integrated LAN

Enables the computer to be powered on
by special LAN signals.

AC Recovery

Sets what action the computer takes
when power is restored.

Deep Sleep Control

Enables you to define the controls when
Deep Sleep is enabled.

USB Wake Support

Enables you to enable the USB devices
to wake the computer from Standby.

Numlock Key

Enables you to set the status of the
Numlock key during boot to On or Off.
Default: Disabled

SupportAssist System Resolution

Auto OS Recovery Threshold

Control the automatic boot flow for
SupportAssist System Resolution
Console and for Dell OS Recovery tool.

Summary of Contents for Inspiron 3472



















































































Search results

Summary of Contents for Inspiron 3472

Reviews:

Related manuals for Inspiron 3472

Brands by name

Popular brands

Dell Inspiron 3472, Service Manual

Search results

Summary of Contents for Inspiron 3472

Reviews:

Related manuals for Inspiron 3472

Brands by name

Popular brands